Can anyone advise on a ROP's for my newly restored MF35x
Are they same as for the MF35?
Where can I find them available?
Installation - Will I have to remove rear wheel wings to fit them etc?
Many Thanks
Nigel
MF35x ROPs
-
- Posts: 11
- Joined: Sat May 22, 2021 5:48 pm
Re: MF35x ROPs
Hi Nigel
yes a rops is the same weather a 35/35x, most you don't have to take the wings off, but if your tractor has just been restored as you state , i would remove the wings so you don't damage the paintwork .
suppliers wise
patrick at fergyland should be able to look after , but if not any of the major tractor spare guys should be able to help
agriline
old 20
mayhill
yes a rops is the same weather a 35/35x, most you don't have to take the wings off, but if your tractor has just been restored as you state , i would remove the wings so you don't damage the paintwork .
suppliers wise
patrick at fergyland should be able to look after , but if not any of the major tractor spare guys should be able to help
agriline
old 20
mayhill
-
- Posts: 1
- Joined: Thu Mar 30, 2023 5:22 am
Re: MF35x ROPs
Just thought a photo of my ROPS pre-restoration might help. This one is currently in pieces in the shed undergoing its restoration.
- Attachments
-
- IMG-20230208-WA0004.jpg (146.95 KiB) Viewed 3521 times
Re: MF35x ROPs
I would steer clear of types where the top crossbar is clamped in place. I had one on a B275 and it would regularly vibrate the crossbar out of the clamps regardless of how tight the bolts were done up. A poor photo but just visible.
This is the bar on my dad's 35x.- Attachments
-
- 293 PF .JPG (38.86 KiB) Viewed 3466 times
What could possibly go wrong?