Re: My TEF Restoration
Posted: Wed May 26, 2021 7:44 am
Impressive work on that TEF BigJim - thanks for sharing Impressive work on that TEF BigJim - thanks for sharingFerguson Club Information Exchange
The place to exchange ideas and learning
https://www.fergusonclub.com/ferguson_forum/
My TEF Restoration
https://www.fergusonclub.com/ferguson_forum/viewtopic.php?f=13&t=6
Page 2 of 2
Impressive work on that TEF BigJim - thanks for sharingRe: My TEF Restoration
Posted: Wed May 26, 2021 11:59 am
Not a problem 
Re: My TEF Restoration
Posted: Sat Jul 31, 2021 7:01 pm
So I’ve managed to do a bit more it not found the time to update this thread.
Head is now on, axle cradle fitted and new bush/pin for the axle beam. New steering joints and foot pegs as the joints rattled and I have never seen so much slack in the foot peg sockets
New wheel bearings, kingpin felt seals and hub seals finished off the front end so I could roll it around again,
Head is now on, axle cradle fitted and new bush/pin for the axle beam. New steering joints and foot pegs as the joints rattled and I have never seen so much slack in the foot peg sockets
New wheel bearings, kingpin felt seals and hub seals finished off the front end so I could roll it around again,
Re: My TEF Restoration
Posted: Thu Aug 12, 2021 9:33 am
Does anyone have a photo of how the battery cable runs from the battery to the starter?
Re: My TEF Restoration
Posted: Sun May 22, 2022 7:52 pm
Hard to believe it’s nearly a year since I last ran the old girl but now she’s come into the workshop for a lick of paint, not a fancy job by far but as long as she’s smart when I start putting her to work I will be happy 