My TEF Restoration

garyaa
Posts: 1
Joined: Tue May 18, 2021 6:42 pm

Re: My TEF Restoration

Post by garyaa »

:) Impressive work on that TEF BigJim - thanks for sharing
T20Bigjim
Posts: 26
Joined: Wed May 19, 2021 8:35 am

Re: My TEF Restoration

Post by T20Bigjim »

Not a problem :D
T20Bigjim
Posts: 26
Joined: Wed May 19, 2021 8:35 am

Re: My TEF Restoration

Post by T20Bigjim »

So I’ve managed to do a bit more it not found the time to update this thread.

Head is now on, axle cradle fitted and new bush/pin for the axle beam. New steering joints and foot pegs as the joints rattled and I have never seen so much slack in the foot peg sockets :o

New wheel bearings, kingpin felt seals and hub seals finished off the front end so I could roll it around again,
Attachments
F16FEA18-0181-4D0D-BEE6-3F841D7AA77B.jpeg
F16FEA18-0181-4D0D-BEE6-3F841D7AA77B.jpeg (155.38 KiB) Viewed 911 times
T20Bigjim
Posts: 26
Joined: Wed May 19, 2021 8:35 am

Re: My TEF Restoration

Post by T20Bigjim »

Does anyone have a photo of how the battery cable runs from the battery to the starter? :)
T20Bigjim
Posts: 26
Joined: Wed May 19, 2021 8:35 am

Re: My TEF Restoration

Post by T20Bigjim »

Post Reply